Functional Finishing Auxiliar_Shanghai yuanna fine chemical co.,ltd

Product Center

Functional Finishing Auxiliaries

Product	Characteristic
Moisture absorbing and sweat removing Agent 716 Anionic/ non-ionic liq	Suitable for polyester and its blends in moisture absorption and sweat removal finishing, excellent moisture absorbing and quick drying properties, antistatic, easy soil removing,excellent washing fastness, preventing the formation of crease marks in one bath along with dyeing. Dosage：Exhaust：1.0-4.0%； Padding：10-40g/ L
Anti-Piling agent 718 Anionic/ non-ionic liq	Imparting fabric with anti pilling and nagging properties.Reducing pilling tendence and increasing abrasion resistance. Dosage：20-40g/ L
Anti-Static agent 722 Anionic/ non-ionic liq	For fabric′s antistatic treatment, excellent moisture absorption, electric conductivity, dust and soil resistance. Dosage： padding：10-30g/ L
Wind Proof agent WD Weak-Cationic liq	Wind proofing, down proofing and softening treatment of high counts, high density cotton, polyester and blends, like bedding. Dosage： padding：50-100g/
Yellowing resisting agent XP Non-Ionic powder	For fabric’s thermosetting, especially nylon and its blends,pale color and white fabric of nylon and spandex, preventing polyamide fibers from forming yellow stain in presetting and film pressing. Dosage：10-30g/ L
Phenol yellowing resisting agent HP Anionic liq	Suitable for fabrics, especially nylon and its blends,excellent anti-yellowing effect. Especially the yellowing caused by antioxidant phenol in storage of nylon and its blends. Dosage： Exhaust 1.0-3.0%(o.w.f)；Padding：10-30g/ L
Stiffener ST Anionic/non-ionic liq	For fabric′s stiffening treatment and edge gumming, stiff and springy handle, thick sense, lasting effect, no softening. Dosage：adjust per requirement：10-20g/ L； stiffening：20-100g/ L
Fire Retardant powder CP Non-Ionic powder	For nonpermanent fire retardancy treatment of cotton, polyester,wool and blends, excellent flame retardant effect, no influence on handle and shade. Dosage： padding：100-200g/ L； Spray：150-300g/ L
Antiultraviolet-ray finishing agent UV Anionic/ non-ionic liq	For antiultraviolet finishing of polyester and its blends,improving sunlight fastness, excellent UV absorption and conversion, especially the wavelength between 280-400 nm. Dosage：Exhaust 2.0-4.0% ； Padding：20-40g/ L
Anti-Bacteria agent 400 Anionic/ non-ionic liq	Imparting textiles with excellent anti-mite and anti-bacterial effects, especially for intimate apparel and bedding. Good Washing fastness. Dosage：Exhaust 3.0-6.0% ； Padding：30-60g/ L
Fluorinated water and oil proof processing agent C8 Weak Cationic liq	For fabric′s permanent and nonpermanent water repellent treatment with good handle. Dosage：padding：10-50g/ L
Fluorinated water and oil proof processing agent C6 Weak Cationic liq	For fabric′s permanent and nonpermanent water repellent treatment with good handle. Dosage：padding：10-50g/ L
Fluoride-free, water and oil proof processing agent NF Weak Cationic liq	For fabric′s nonpermanent water repellent treatment rendering good handle. Dosage：Exhaust：30-60g/ L
Soil removing agent SR Weak Cationic liq	For soil removing treatment of natural and synthetic fibers,excellent water proofing, oil proofing, soil proofing and stain resisting properties. Dosage：padding：30-60g/ L
Anticrease, noniron,low formaldehyde resin finishing RES	For crease and shrink resistance, iron-free treatment of cotton,viscose and blends, excellent easy care performance.Formaldehyde on cloth surface is less than 75 ppm,compatible with most softener, stiffener and whitening agent in one bath Dosage：padding：40-80g/ L
Anticrease, noniron, low formaldehyde resin finishing RES-N	For crease and shrink resistantce, iron-free treatment of cotton,viscose and blends, Formaldehyde free, compatible with most softener, stiffener and whitening agent in one bath. Dosage：padding：60-120g/ L
Anti-Crease and noniron finshing catalyst RES-C	Applicable along with noniron resin, lowing reaction temperature, accelerating the reaction between resin and fibers, shortening reaction time. Dosage：usage is 28-30% of resin
Anti-Crease and noniron finshing protectant RES-P	Applicable along with noniron resin, improving textile′s tearing strength, making up for the damages caused by resin′s cross-linking. Dosage：Padding：20-40g/ L
Anti-Crease and noniron finshing strength improver RES-H	Improving textile′s strength and reducing strength damages.Imparting excellent elasticity and handle Dosage：Padding：10-30g/ L